Paslode IMCT Impulse, 3-1/4", Cordless Framing Nailer, Drives 2" To 3-1/4" Paper Tape Nails, No Hose Or Compressor Required, Comes With Rugged Plastic Carrying Case, 1 Battery & Battery Charger, Shoots Both Paslode Clipped Head & Round Drive Nails, Features A Lightweight & Well Balanced Design, Tool Free Depth Adjustment & Powerful Motor To Tackle A Variety Of Framing Applications, Is Excellent For Framing, Wall Sheathing, Roof Sheathing, Floor Decking & More, Not Recommended For Driving 3" & 3-1/4" Nails Into Pressure Treated Lumber, Requires Fuel Cell & Battery To Operate, 1 Year Warranty.
Ideal for light framing and remodeling projects and high-volume commercial use, the Paslode Cordless IMCT Framing Nailer is compatible with 2.0-inch to 3.25-inch full- and clipped-head nails. This handy, high-performance tool lets you avoid the hassle of compressor noise and hoses. Also, it's easy to handle and hold, offers consistent performance, and supplies the right amount of power for a range of uses.
The highly visible, easy-to-access load magazine makes reloading quick and simple. View larger.
Batteries charge in under two hours for convenient, cord-free power. View larger.
Each red fuel cartridge drives up to 1200 nails (fuel cell not included). View larger.
Lightweight, Hose-Free Operation Minimizes Arm Fatigue Measuring 12.0 inches long and weighing just 7.3 pounds, the IMCT Framing Nailer is comfortable to handle and hold. Its 'sure grip' and well-balanced design combine with a soft trigger to reduce arm fatigue. And because you won't have to drag a hose with you as you work, you'll be able to drive nails better and longer, without undue stress on your arms, hands, and wrists.
Compact, Heavy-Duty Design Works Anywhere and Everywhere Compact enough to work in tight, hard-to-reach areas, the IMCT Framing Nailer packs a powerful punch with heavy-duty construction that can handle tough job conditions. It shoots up to 1,200 nails on a single fuel cell and up to 4,000 nails on a full battery charge, providing a cycle rate of two to three nails per second. And because it offers tool-free depth-of-drive adjustment--no wrenches required!--you can get more done in less time.
Internal Combustion Linear Motor for Robust Performance Unlike other power fastening tools, the IMCT Framing Nailer is powered by an internal combustion linear motor. In simpler terms, the nailer owes its robust performance to its motor, which is similar to an automobile's motor. Additionally, the tool ignites a fuel and air mixture to produce the energy needed to drive the motor, and ultimately, the fastener.
Patented Battery System for Consistency and Reliability Another unique feature of this nailer is that it uses a patented system that requires both a fuel cell and a rechargeable battery (the fuel cell is not included). This translates to optimum consistency and reliability, whether you're building a deck, working with wall sheathing, or repairing a roof. It also means the IMCT Framing Nailer is entirely self-contained. The tool carries its own fuel supply and battery--along with a supply of fasteners--making it easy to bring with you from site to site.
Lockout Feature to Prevent Blank Firing and Wood Damage The IMCT Framing Nailer boasts a lockout feature to prevent needless blank cycling, which can waste fuel and damage both the wood you're working with and the nailer's components. This feature works by ensuring that five nails will be left in the magazine when the follower reaches the lockout area. Additionally, the tool will not operate when its nail supply has less than six nails.
High-Visibility Magazine and Belt Hanger for Convenience The IMCT Framing Nailer is designed to be exceptionally user friendly, with features that help keep your job running smoothly. First, the load magazine is highly visible, so it helps prevent you from running out of nails in the middle of a project. There's also a convenient dual-position belt hanger, so you don't have to lay the nailer on the ground or on top of a ladder, nor do you have to wedge it among rafters. And if you can't remember where you last placed your nailer, its bright orange color makes it easy to spot.
About the Battery Charging System The IMCT Framing Nailer comes with a rechargeable battery and its own charging system. This charging system is the only one that will work with Paslode batteries (both round and oval). When your tool arrives, you'll first need to charge the battery. Batteries will generally take five minutes to two hours to recharge, depending on the amount of discharge within the battery.
Dimensions and Warranty Information The IMCT Framing Nailer has a height of 14.5 inches and weighs 7.3 pounds. It comes with a one-year limited warranty on all parts, a five-year warranty on all molded nylon parts, and a 90-day limited warranty on the bumper, driver blades, O-rings, and seal rings.
What's in the Box Nailer, 6.0-volt battery, charger, belt hanger, rugged plastic carrying case, safety goggles, manual, and 5/32-inch hex wrench.
The IMCT Framing Nailer is designed to for easy handling and reliable, professional performance.
Customer Reviews:
Avg. Customer Rating: 4.5 / 5.0
Light, reliable, rugged, convenient.:
Bought one last fall and have fired several cases of nails through it on an extensive garage remodel and several other projects with no malfunctions even in temperatures down to 20 degrees and after dropping 15 feet on to concrete a couple times. The air powered nailers we have barely get used anymore. Setting up a compressor and dragging air hoses around crowded job sites and climbing on icy staging are things of the past and I love the combo rafter/belt hook. Takes ten seconds to pull from my truck and... more info
Cold weather nailer:
I'm a professional, and can't recommend this as a production nailer. And in really cold weather it doesn't have the power for framing. However, I needed a nailer for nailing plywood in a freezer at 0-5 below. This wasn't a walk-in freezer. It's three times the size of a football field. So I nailed a lot of plywood and 1 by 6s, driving probably 200,000 nails. With the fork-lift traffic, hoses and cords were out of the question. This tool performed admirably, though I recommend sticking to the Paslode nails.... more info
Great must have tool.:
The Paslode 900420 Cordless nail is a must have tool for framing and fence building. Works great. Supplies are easy to find. Takes a lickin and keeps on firing.
Not for High Altitudes:
Nice product, but not for high elevations. Building in the high country of Colorado (9,000') found the gun to be less than useful at anything longer than a 2 3/8" nail. Anything longer than that requires additional nail setting with your hammer. (The "thin air" up here just doesn't have the kick needed to drive anything longer) If these were hand-drives, that would be no big deal, but as many know, gun nails can be difficult to set (they like to bend!!). This won't effect a lot of users, but it is worth... more info
