Similar to Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler (1 - 10)

Online Shopping / Similar to Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler

Big Fat Search


1.		Porta-Nailer 46196 1-inch by 18 Gauge 1/4-Inch Crown Staple (5,000 per Box) from Porta-Nails Price: $8.50 Customer Review: Found the Floor Stapler worked fine, once I figured out how to assemble it, load staples - simple tasks once you do them, but the tool came with zero information. The DVD was just product advertizing, and the printed materials were a parts list.	Customer Rating: 4.0 / 5.0 Click here for more information


2.		Porta-Nail 42620 Flooring Nail/Staple Setting Tool from Porta-Nails Price: $13.99 Customer Review: It does what its supposed to do. If you drive L-shaped nails when installing hardwood flooring, and the nail doesnt drive all the way in, this is the tool to use. Better than a typical nail set. Has a wider tip for the wider nail head. Good product, worth the extra few bucks.	Customer Rating: 3.5 / 5.0 Click here for more information


3.		B & C Eagle 9032 1-1/4-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple (5,000 per box) from B & C Eagle Price: $22.63 Customer Review: I purchased these staples for use on 9/16" strand-oriented bamboo flooring. The staples were practically useless for this application. The bamboo is too hard - the staples are not made with hard enough steel. 7 or 8 out of 10 staples would not cleanly penetrate the flooring into the subfloor - they... more info	Customer Rating: 3.5 / 5.0 Click here for more information


4.		B & C Eagle 9025 1-Inch by 18 Gauge Narrow Crown Galvanized Finish Staple (5,000 per box) from B & C Eagle Price: $17.49 Customer Review: Thousands and Thousands shot through a Porter Cable and Milwaukee with no problem. Previously we used Senco staples (made in USA) but the cost got out of hand. We reluctantly switched to the B & C and glad we did. Top quality.	Customer Rating: 5.0 / 5.0 Click here for more information


5.		Hardwood Floors from Taunton Press Price: $12.29 Customer Review: I prepared myself for my first hardwoor flooring project by reading this book. It turned out really good (according to my wife). Without this book, however, it would be hidden underneath a new carpet right now! Too many DIY books are written by technical writers who work for companies that... more info	Customer Rating: 4.5 / 5.0 Click here for more information


6.		GoodYear 045 3/8-Inch-by-50-Feet Safety Yellow Rubber Hose 3/8 -Inch by 50-Feet 250 PSI With 1/4-Inch Ends from GoodYear Price: $19.99 Customer Review: I got this hose for my husband for Christmas; as per his request. The hose was of good quality for a better price than at tool stores.	Customer Rating: 4.5 / 5.0 Click here for more information


7.		Dremel 6300-01 120-Volt Multi-Max Oscillating Kit from Dremel Price: $86.49 Customer Review: The oscilating tools were around a long time as cast removal tools in doctors' offices. I was interested in them since there is no spinning blade to cut you or throw debris. I bought this since the fein was way too much for non-professional use. I was trimming out some transition strips and laminate... more info	Customer Rating: 4.0 / 5.0 Click here for more information


8.		Bessey SVH400XL SVH Flooring and Clamping System from Bessey Price: $33.95 Customer Review: I bought two clamps. One clap does not lock and hold. Hit my finger so many time so I had brueses. Have two 2 year old clamps from the same comapny. One is working fine, second does not lock and hold.	Customer Rating: 4.5 / 5.0 Click here for more information


9.		Bostitch FLN-200 2-Inch Flooring L-Nail, 1000-Per Box from Bostitch Price: $10.39 Customer Review: The nails arrived quickly, were as described, and worked great. I went through 4 boxes without any problems. Much cheaper than at home depot.	Customer Rating: 4.0 / 5.0 Click here for more information


10.		Factory-Reconditioned Bostitch U/BT200K-2 5/8-to-2-Inch 18-Gauge Brad Nailer from Bostitch Price: $32.99 Customer Review: This is a good looking tool. The only problem Ive run across is after you use it a few times, the pin that pushes the brad out of the gun gets stuck in the out position. This entails having to loosen the 3 screws on the front of the gun and pushing the pin back up inside the gun.Its too much trouble... more info	Customer Rating: 4.0 / 5.0 Click here for more information

1 - 10

Portions © Amazon.com, Inc.

*Featuring TOP Sellers in Magazines! ...*
	No results found. Click here for amazon.com liposuction philippines \| Obagi Clear \| Starting a Corporation \| tanning beds \| Cosmetic Surgery Philippines \| low carb foods \| RX7 Sale

Similar to Porta-Nailer 461 1-Inch 18-Gauge Narrow (1/4-Inch) Crown Flooring Stapler (1 - 10)